.
|
|
Written by Andi
|
|
Thursday, 09 October 2008 |
BF-2000 (Sticky Back)
-
Optimum print quality at maximum speed
The BF-2000D & 2000V have been designed specially for continuous business forms & envelop printing presses.
The BF-2000D is developed for dual purpose use.
(UV & conventional inks)
The BF-2000V is exclusively for UV printing.
| Type |
BF-2000D |
BF-2000V |
| Thickness |
0.85 / 0.90 / 0.95 / 1.00 / 1.05mm |
| Hardness |
86 (Shore A) |
| Color |
Light Blue |
Grey |
| Adhesion |
13N/25mm |
| Flexibility |
70 degrees |
Features
- Outstanding dot and solid reproduction due to unique fabric design and special surface treatment.
- Excellent adhesive strength.No edge peeling even with high speed printing.
- Easy to mount due to improved flexibility.
- Easy to remove. No adhesive residue to clean up on the blanket cylinder.
- Good resistance to press chemicals.
- Long life and low piling.
|
|
|
Written by Andi
|
|
Thursday, 09 October 2008 |
FS-615 Premium
-
Higher Printing Quality and Reliability
Fujikura has newly developed the FS-615 Premium offering Excellent print contrast and solid ink densities by the fine grind surface & spacial compressible layer.
The spacial pre-treated 4-ply stable carcass provides outstanding stability on cylinder and reduction of gauge loss.
| Type |
Compressible 4-ply |
| Thickness |
1.95mm
|
| Compressibility |
550N/3cm2 |
| Hardness |
82 (shore A) |
| Colour |
Noble Violet |
| Tensile strength |
102 (N/mm) |
| Elongation at break |
4.0% |
Features & Benefits
- Superior dot reproduction with the fine rubber grind and soft compressible layer
- Unique anti-edge-marking rubber enables to use with wide variety of sheet-size
- Supecial rubber compound for anti-swelling
- Minimum gauge loss by using the new & specially pre-treated robust carcass
- excellent recovery from smashes/shinking
|
|
|
|
Last Updated ( Saturday, 11 October 2008 )
|
|
|
|
Fujikura Blanket 
